Berwick · Local services

Switchboard upgrades in Berwick

A switchboard upgrade replaces an old fuse box, or a board short on safety switches (RCDs), with circuit breakers and safety switch protection that suit how the house is used now. Tell us what is prompting the work at your Berwick property and we’ll be in touch about your request.

Request a quote
Switchboard upgrade: a modern home switchboard with circuit breakers behind a clear cover

What’s involved

The electrician looks at the existing board, the main switch, the circuits it supplies and the earthing. The quote should say what is being replaced, which circuits get safety switch protection, and whether the meter box or the consumer mains are part of the job.

In Victoria, work on the main switchboard and meter box is prescribed electrical work. It is done by a licensed electrician working for a Registered Electrical Contractor, inspected by an independent Licensed Electrical Inspector that the contractor arranges, and recorded on a Certificate of Electrical Safety that you receive a copy of.

Leave the switchboard cover on. A photo of the closed board and the meter box is enough to start the conversation.

How much should a switchboard upgrade cost?

We don't publish a price for switchboard upgrades in Berwick yet, because we don't have enough real local quotes to give an honest range. The cost depends mostly on how many circuits the board supplies and how much work sits around the board itself, and an electrician can only price it after seeing the board.

  • The number of circuits, and whether each one gets its own RCBO or circuits share a safety switch
  • Whether the meter box or the enclosure needs replacing too
  • Single-phase or three-phase supply
  • Extra capacity for an EV charger, solar or a battery
  • Faults found when the circuits are tested, which need fixing before the board is switched back on
  • Access, for example a board set into a wall that needs patching afterwards

Ask for an itemised quote, so you can compare two electricians on the same scope of work.

Should I upgrade my switchboard?

Have the board looked at if it still has ceramic fuses, has no safety switch, trips often, or has no room for the circuits a new EV charger, solar system or battery would need. Age alone doesn't settle it: an electrician should inspect the board before recommending a full replacement.

  • Ceramic (rewireable) fuses instead of circuit breakers
  • No safety switch, or safety switches on only some circuits
  • A safety switch or circuit breaker that keeps tripping
  • Sparks, scorch marks or a burning smell around the board
  • No spare space for new circuits

Energy Safe Victoria lists old switchboards, particularly ones without a safety switch, among the signs that a home's wiring may be faulty.

EV charger installation in Berwick

Source: Energy Safe Victoria: Test. Reset. Protect.

Safety switch (RCD) installation

A safety switch, or residual current device (RCD), monitors the electricity flowing through a circuit and cuts the power within milliseconds when it detects a problem that puts people at risk. Safety switches work alongside circuit breakers and fuses rather than replacing them. They are usually added as part of a switchboard upgrade, although a board that already has circuit breakers may have room to add them.

If a safety switch trips again straight after you reset it, stop resetting it and have an electrician find the fault on that circuit. Energy Safe Victoria recommends pressing the test button on each safety switch every three months; if the power doesn't go off on that circuit, the switch may have failed.

Rental properties in Victoria must have a switchboard with circuit breakers and safety switches under the rental minimum standards, which began on 29 March 2023. Consumer Affairs Victoria notes that an older fuse board may have to be replaced entirely to meet the standard.

Sources: Energy Safe Victoria: Test. Reset. Protect.; Energy Safe Victoria: Household wiring; Consumer Affairs Victoria: Rental minimum standards

How long does it take to upgrade a switchboard?

Ask the electrician for a time for your job, because it depends on the number of circuits, any meter box work and whether testing turns up faults. The power to the house is off while the board is changed over, so plan for the fridge, any medical equipment and anyone working from home.

The Licensed Electrical Inspector's check of the new board is a separate step that your contractor arranges.

What should you receive after a switchboard upgrade?

You should have an itemised quote before the work starts and a Certificate of Electrical Safety when it is finished. The contractor must give you a copy of the certificate, and switchboard and meter box work must also be inspected by a Licensed Electrical Inspector.

  • An itemised quote that lists the board, the safety switches and any meter box work
  • Every circuit labelled on the new board
  • Your copy of the Certificate of Electrical Safety
  • Confirmation that the inspection has been arranged or done

You can check an electrician's licence or a contractor's registration on Energy Safe Victoria's public register before you agree to a quote.

Sources: Energy Safe Victoria: Certificates of Electrical Safety; Energy Safe Victoria: Search a public register

View all switchboards and ev chargers services

Compare your options

Other switchboards and ev chargers services

Planning work outside Berwick? Read the local project guides for Narre Warren or Narre Warren South for property and access details to include in your enquiry.

Useful answers

Frequently asked questions

Can you upgrade a switchboard without rewiring the house?

Often, yes. A new switchboard connects to the existing circuits, and wiring only needs replacing where testing shows it is damaged or unsafe. Adding safety switches can bring an existing fault to light, because the switch trips when it detects one.

How much does it cost to upgrade a meter box?

It depends on whether the enclosure, the main switch or the consumer mains need replacing. Meter box work is prescribed electrical work in Victoria and needs an inspection by a Licensed Electrical Inspector. Ask whether the switchboard quote includes it and who arranges any work by the electricity distributor.

Does an EV charger need a switchboard upgrade?

Not always. It depends on the space in the board, the supply to the house and what else runs at the same time. Ask the electrician to check before you buy a charger.

Should I remove the switchboard cover for a photo?

No. Photograph the board with the cover closed, and the meter box, from a safe distance.

How do I request a quote?

Use the form on this page to send your suburb, postcode and a description of the work. Include a photo of the closed board if you have one.

Your property · Berwick

Tell us what you need.

Tell us about the work at your property. Leave a phone number or email so we can follow up.

  1. Tell us what you need

    A few details about the job and its location.

  2. Discuss your options

    We’ll be in touch about your request.

  3. You decide

    Agree the scope and price before any work starts. An enquiry is not a booking.

Still working out the details? A brief description is enough to start.

Request a quote

Switchboard upgrades in Berwick

Your quote request

Add a phone number or email. You can leave both if you prefer.